если кому интересно,
у меня стоит релиз от Скидроу (3 ДВД),
файлы russian.streamed заменил на те что от 1С,
игра идёт нормально и ни-каких проблем со звуком нет
3-и варианта настройки для файла rageconfig.cfg
высокие:
//High-end Config By FusedCore
seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB
seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire
seta image_anisotropy "16" //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0
seta image_filter "GL_LINEAR_MIPMAP_LINEAR"
seta image_blend "GL_LINEAR_MIPMAP_LINEAR"
seta image_preload "1" //Use preload images when ever possible
seta image_lodbias "-1" //LoD settings
seta image_ignoreHighQuality "0" //Sets up for using HQ gfx
seta image_ignoreLowQuality "1" //ignores the low textures
seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024" //Cache size in Megabytes
seta image_cacheMinK "10" //Cache minimum size in kilobytes
seta r_aspectRatio "2" // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled
seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing
seta r_shadowsHighQuality "1" //Fore High Quality shadows
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "32" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "1" //Ambient occlusion
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "1" //use blur
seta r_skipBump "0"
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "1"
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1" //LoD settings
//below is cache settings And advanced GFX settings
seta vt_pageimagesizeuniquediffuseonly2 "8192"
seta vt_pageimagesizeuniquediffuseonly "8192"
seta vt_pageimagesizeunique "8192"
seta vt_pageimagesizevmtr "8192"
seta vt_maxPPF 64 //Set this to 64 for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"
//Begin Advanced GFX Filtering and Sharper Images. Comment these 3 lines out if you are having issues or don't like the way it looks.
//seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
seta vt_blend "GL_LINEAR_MIPMAP_LINEAR"
//End of Advanced GFX Filtering
seta vt_useCache "1"
seta vt_cacheMegs "1024"
seta vt_cacheMinK "10"
seta vt_ignoreHighQuality "0"
seta vt_ignoreLowQuality "1"
seta vt_maxaniso 4 //Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures
средние:
//Mid-end Config By FusedCore
seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB
seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire
seta image_anisotropy "8" //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0
seta image_filter "GL_LINEAR_MIPMAP_LINEAR"
seta image_blend "GL_LINEAR_MIPMAP_LINEAR"
seta image_preload "1" //Use preload images when ever possible
seta image_lodbias "-1" //LoD settings
seta image_ignoreHighQuality "0" //Sets up for using HQ gfx
seta image_ignoreLowQuality "1" //ignores the low textures
seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024" //Cache size in Megabytes
seta image_cacheMinK "10" //Cache minimum size in kilobytes
seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled
seta r_aspectRatio "2" // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing
seta r_shadowsHighQuality "1" //Fore High Quality shadows
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "16" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "1" //Ambient occlusion
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "1" //use blur
seta r_skipBump "0"
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "1"
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1" //LoD settings
//below is cache settings And advanced GFX settings
seta vt_pageimagesizeuniquediffuseonly2 "8192"
seta vt_pageimagesizeuniquediffuseonly "8192"
seta vt_pageimagesizeunique "8192"
seta vt_pageimagesizevmtr "8192"
seta vt_maxPPF 16 //Set this to 64 for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"
//Begin Advanced GFX Filtering and Sharper Images. Comment these 3 lines out if you are having issues or don't like the way it looks.
//seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
seta vt_blend "GL_LINEAR_MIPMAP_LINEAR"
//End of Advanced GFX Filtering.
seta vt_useCache "1"
seta vt_cacheMegs "1024"
seta vt_cacheMinK "10"
seta vt_ignoreHighQuality "0"
seta vt_ignoreLowQuality "1"
seta vt_maxaniso 2 //Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures
низкие:
//Low-end Config By FusedCore
seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB
seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire
seta image_anisotropy "2" //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0
seta image_filter "GL_LINEAR_MIPMAP_LINEAR"
seta image_blend "GL_LINEAR_MIPMAP_LINEAR"
seta image_preload "1" //Use preload images when ever possible
seta image_lodbias "-1" //LoD settings
seta image_ignoreHighQuality "1" //Sets up for using HQ gfx
seta image_ignoreLowQuality "0" //ignores the low textures
seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024" //Cache size in Megabytes
seta image_cacheMinK "10" //Cache minimum size in kilobytes
seta r_aspectRatio "2" // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled
seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing
seta r_shadowsHighQuality "0" //Fore High Quality shadows
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "8" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "0" //Ambient occlusion
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "0" //use blur
seta r_skipBump "0"
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "0"
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1" //LoD settings
//below is cache settings And advanced GFX settings
seta vt_pageimagesizeuniquediffuseonly2 "4096"
seta vt_pageimagesizeuniquediffuseonly "4096"
seta vt_pageimagesizeunique "4096"
seta vt_pageimagesizevmtr "4096"
//seta vt_maxPPF 8 //Set this to 64 for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"
//Begin Advanced GFX Filtering and Sharper Images. Comment these 3 lines out if you are having issues or don't like the way it looks.
//seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
//seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
//seta vt_blend "GL_LINEAR_MIPMAP_LINEAR"
//End of Advanced Filtering.
seta vt_useCache "1"
seta vt_cacheMegs "1024"
seta vt_cacheMinK "10"
seta vt_ignoreHighQuality "1"
seta vt_ignoreLowQuality "0"
//seta vt_maxaniso 2 //Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures
есть ещё вариант для СУПЕР высоких,
но так как у меня карта это не потянет
я его не сохранил, поэтому и не прикладываю,
но его можно найти в Инете
