FurMark 1.21.2.0 [En]
Версия программы: 1.21.2.0 Официальный сайт: Geeks3DЯзык интерфейса: Английский Лечение: не требуется Системные требования:
Описание:FurMark - полезная утилита, позволяющая проводить стресс-тестирование видеокарт совместимых с API OpenGL. В настройках можно задавать разрешение экрана, активировать оконный или полноэкранный режим и настраивать сглаживание, а также указывать время проведения теста. Для оверклокеров будет полезен режим испытания на принудительный отказ (burn-in test), с помощью которого можно проверить стабильность графической платы и возможность системы охлаждения (например при разгоне). Результат теста можно опубликовать на официальном сайте разработчика для занесения в базу полученных результатов. В состав программы входят последние версии утилит GPU-Z и GPU Shark. Version 1.21.2.0 - 2020-06-03
+ added the display of GPU-Z Board Power Draw in Watts
! minor bugfixes in the submit score process
! updated: GPU-Z 2.32
! updated: GPU Shark 0.17.1.0
! updated: ZoomGPU 1.26.1 (GPU monitoring library) Version 1.21.2.0 - 2020-06-03
+ added the display of GPU-Z Board Power Draw in Watts.
! minor bugfixes in the submit score process.
! updated: GPU-Z 2.32
! updated: GPU Shark 0.17.1.0
! updated: ZoomGPU 1.26.1 (GPU monitoring library)
Version 1.21.1.0 - 2020-03-23
+ added the display of GPU-Z Power Consumption and
Chip Power Draw (AMD) in Watts.
! updated GPU-Z sensor name: "VDDC" -> "GPU Voltage".
! updated: GPU-Z 2.30
! Log file back in FurMark's folder.
Version 1.21.0.0 - 2020-01-23
+ added support of AMD Navi GPUs.
+ added support of AMD Radeon RX 5500 XT and RX 5600 XT.
+ added support of GeForce RTX 2060 with TU104 GPU and
GeForce GTX 1650 SUPER.
+ updated reporting of graphics drivers for Radeon graphics cards.
+ new online database.
! Log file is now stored in user's temp folder.
! updated: GPU Shark 0.16.1.0
! updated: GPU-Z 2.29
! updated: ZoomGPU 1.25.1 (GPU monitoring library)
Version 1.20.9.0 - 2019-11-20
+ added support of NVIDIA Quadro RTX 3000/4000/5000 Mobile, GeForce GTX 1650 Mobile, GeForce GTX 1660 Ti Mobile, GeForce RTX 2060/2070/2080 Mobile, Quadro T1000/T2000 Mobile, and AMD Radeon RX 5500.
* fixed fan speed reading on NVIDIA GPUs.
! updated: GPU Shark 0.15.1.0
! updated: GPU-Z 2.27
! updated: ZoomGPU 1.24.2 (GPU monitoring library)
Version 1.20.8.0 - 2019-08-22
+ added support of NVIDIA GeForce RTX 2080 SUPER and variants of RTX 2060/2070 SUPER.
+ added partial support of AMD Radeon RX 5700 / 5700 XT.
! removed OpenGL extensions and caps in the score submission.
! updated: GPU Shark 0.14.1.0 and GPU-Z 2.24.0
Version 1.20.7.0 - 2019-07-03
+ added support of NVIDIA GeForce RTX 2060 SUPER and RTX 2070 SUPER.
! updated: GPU Shark 0.14.0.0 and GPU-Z 2.22.0
! updated: ZoomGPU 1.23.2 (GPU monitoring library).
Version 1.20.6.0 - 2019-06-06
* fixed GPU-Z sensors reading.
! updated: GPU Shark 0.13.1.0 and GPU-Z 2.21.0
! updated: ZoomGPU 1.23.1 (GPU monitoring library).
Version 1.20.5.0 - 2019-04-10
+ screen saver/blanking and sleep mode are now disallowed when FurMark is running. Use the new command line param /allow_screen_saver to allow screen saver/blanking and sleep mode.
+ added support of NVIDIA GeForce GTX 1660 Ti and GeForce GTX 1660.
+ added partial support of AMD Radeon VII.
! updated: GPU Shark 0.13.0.0 and GPU-Z 2.18.0
! updated: ZoomGPU 1.23.0 (GPU monitoring library).
Version 1.20.4.0 - 2019-01-16
+ added NVIDIA GeForce RTX 2060 support
! updated: GPU Shark 0.12.4.0
! updated: ZoomGPU 1.22.5 (GPU monitoring library).
Version 1.20.3.0 - 2019-01-15
* fixed the GPU temperature reading on some Radeon GPUs like RX 400 series.
! GPU temperature spike filter is now disabled by
default.
- removed support of Windows XP.
Version 1.20.2.0 - 2018-12-31
+ added NVIDIA GeForce RTX (2080, 2080 Ti, 2070) and Titan RTX support.
+ added Radeon RX 590 support.
! in GPU monitoring log file, GPU-Z values are used when GPU temperature, GPU core and mem clocks are 0.
! GPU data log polling factor set to 1 (was set to 10 in previous versions). Now GPU data are logged every second when Log GPU data is checked in Settings box. This value can be changed in the config file (log_gpu_data_polling_factor attribute).
! updated: GPU Shark 0.12.2.0 and GPU-Z 2.16.0
! updated: ZoomGPU 1.22.2 (GPU monitoring library).
Version 1.20.1.0 - 2018-05-15
+ added minimal high-DPI support. FurMark is no longer scaled (blurry effect) on high-DPI devices.
! updated: GPU Shark 0.11.2.0 and GPU-Z 2.9.0
! updated: ZoomGPU 1.21.7 (GPU monitoring library).
Version 1.20.0.1 - 2018-01-23
! updated GPU-Z 2.7.0
Version 1.20.0.0 - 2018-01-18
! changed default thread affinity mask from 2 to 0. If needed, the thread affinity mask can be set via the command line option /render_thread_affinity_mask=...
+ added 21/9 resolutions: 2560x1080, 3440x1440 and 5120x2160.
+ added NVIDIA GeForce GTX 1060 5GB and NVS 810.
+ added NVIDIA Quadro P1000, P2000, P3000 and P4000.
+ added support of NVIDIA TITAN V.
+ added support of NVIDIA GeForce MX130 and GeForce MX110.
! updated: GPU Shark 0.11.1.0 and GPU-Z 2.6.0
! updated: ZoomGPU 1.21.5 (GPU monitoring library).
Version 1.19.1.0 - 2017-10-30
+ added support of NVIDIA GeForce GTX 1070 Ti.
+ added support of AMD Radeon RX Vega 64 and Vega 56.
+ added support of AMD Radeon Vega Frontier Edition.
! updated: GPU Shark 0.10.0.4 and GPU-Z 2.40
! updated: ZoomGPU 1.21.2 (GPU monitoring library)
Version 1.19.0.0 - 2017-04-26
+ added support of NVIDIA GeForce GTX 1080 Ti and TITAN Xp.
+ added support of AMD Radeon RX 580, RX 570.
+ added support of AMD Radeon Pro WX 7100, WX 5100, WX4100,
WX 4150 and WX 4130.
+ added support of AMD Radeon R7 M360, R7 M340, R7 M260,
R7 M460 and R7 M440.
+ added support of the GTX 1050 for notebook (ID: 0x1c8d).
! update the color of the dynamic background (red/orange).
! updated: GPU Shark 0.9.11.4 and GPU-Z 1.20.0
! updated: ZoomGPU 1.20.4 (GPU monitoring library)
Version 1.18.2.0 - 2016-11-08
+ added support of GeForce GTX 1050, GTX 1050 Ti,
Quadro P5000, Quadro P6000, Quadro M6000 12GB, M6000 24GB,
Quadro K620, K1200 and K2200.
! updated: GPU Shark 0.9.10.3 and GPU-Z 1.12.0
! updated: ZoomGPU 1.19.4 (GPU monitoring library)
Version 1.18.1.0 - 2016-09-13
+ added command line parameter to enable or disable the dynamic background (/enable_dyn_bkg=1 or
/enable_dyn_bkg=0).
! updated: GPU Shark 0.9.10.2 and GPU-Z 1.11.0.
! updated: ZoomGPU 1.19.3 (GPU monitoring library).
Version 1.18.0.0 - 2016-08-24
+ added support of recent GeForce GPUs (GTX 1080, GTX 1070, GTX 1060 6GB, GTX 1060 3GB).
+ added support of recent Radeon GPUs (RX 480, RX 470, RX 460).
* fixed: reading of the current value of the clock speeds on Radeon GPUs.
* fixed: screenshots (F9) are correctly generated (in the new screenshots/ folder).
In some cases, you have to start FurMark with admin rights to be able to save screenshots.
+ added 5k resolution (5120x2880) to the resolution selection box.
+ added preset:2160 (4k) in the command line options (/preset=2160).
! updated: GPU Shark 0.9.10.0 and GPU-Z 1.10.0.
! updated: ZoomGPU 1.19.1 (GPU monitoring library).
Version 1.17.0.0 - 2015-08-21b>
+ added support of GeForce GTX 950.
! updated Windows 10 detection code.
! updated: GPU Shark 0.9.6.0 and GPU-Z 0.8.5
! updated: ZoomGPU 1.14.0 (GPU monitoring library) Скриншоты:
Время раздачи: до появления первых 3-5 скачавших |
|
|
|
(Голосов: 
